PLUVIGUM FYBRO is a mono-component liquid product based on photoreticulating synthetic elastomers in aqueous dispersion. It is a fibrereinforced paste that can be easily applied on horizontal and vertical surfaces. It polymerizes to create a complete elastic impermeable membrane resistant to thermal shock, ultraviolet rays and acid rain. It adheres perfectly to all types of materials including bitumen coating, concrete, fibre cement, wood, metal surfaces, etc. PLUVIGUM FYBRO is used for waterproofing old and new treadable coverings (terraces, balconies, etc.); for waterproofing valley gutters and fibre cement coverings. It is also used for restoring old bitumen waterproofing.
MONOFLEX is a single-component formula composed of elastomeric polymers, bitumen emulsion, inorganic binders, quartz selected aggregates and special additives in water dispersion. Ready to use, no mixing is required. It comes as an easily workable creamy paste, applicable both horizontally and vertically, with high adhesion to all surfaces in concrete and masonry. After full drying, it forms a flexible and waterproof membrane with good transpirability, resistant to the action of agents such as CO2, SO2 and saline aggression of chlorides and sulphates.
BITUGUM is a ready to use semi-dense paste obtained by mixing fine bitumen, special synthetic resins and mineral fillers. The resulting bituminous paste is brown in colour, and during the drying phase it will take on a dark black colour, showing an excellent adhesiveness to support and high elasticity.
PLUVICEM GUAINA is a waterproofing system to produce waterproofing membranes. Component A is an acrylic elastomerbased liquid in an aqueous solution and component B a cement-based powder that works as the catalyst and a special alkaliresistant synthetic fibre reinforcement mesh. By mixing the two components a fluid paste is obtained, perfectly embedding the mesh. The reinforced coat made with PLUVICEM GUAINA is treadable and can be covered with ceramic tiles, directly with glue or covered with a coloured protection for waterproof membranes.
PLUVELASTIC is a dual-component cementbased mortar, obtained by mixing COMPONENT A composed of selected inert cement binders and special additives and COMPONENT B composed of synthetic polymers in aqueous dispersion. Mixing the two components it creates a paste that can be easily worked and applied either horizontally or vertically. PLUVELASTIC is used for waterproofing and protecting concrete structures, increasing the durability of concrete and reinforced concrete structures, for waterproofing and protecting both rendered and masonry walls (especially wainscots), for rendering with fissures where there is a risk of small leaks, waterproofing and protecting balcony, parapet, shower cubicle and kitchen cement screed before laying down ceramic tiles, or waterproofing foundations wall and protecting structures used to contain water.
